VERTICAL BALER

Baler X50 HD Galvanized

The galvanized version of the X50 HD is specially designed for wet and harsh environments.
Add to your quote

VERTICAL BALER

Baler X50 HD Galvanized
Popular options
Gain remote access to your baler with our intelligent fleet monitoring system, BRA-IN. You see balers full, service status, number of collections etc. and optimize your Total Cost of Ownership.
BRA-IN lets you monitor your balers intelligently
Add to quote
Use a flap door to avoid waste back-run when you fill cans or PET bottles into your baler. Galvanization makes it suitable for wet waste or waste with residual liquids.
Handle bottles and cans efficiently with a galvanized flap door
Add to quote
Compact and drain your waste at once. Equip your baler with an efficient draining system. Dripping is prevented with additional door sealing.
Lead liquids out of your baler with a draining system
Add to quote
The auto lock lets you decide who can use your baler. Everyone can load it, but it requires a PIN code or a personal key tag to run press cycles.
Block access to baler controls with auto lock
Add to quote
Quote details

VERTICAL BALER

Baler X50 HD Galvanized

    Fill out your details below and we'll get back to you

    Overview
    How to operate
    Safety
    Technical specifications
     

    Withstands severe demands from environment

    When demands on the machine are severe enough to demand a special surface treatment, the galvanized finish is suitable for all applications without hygienic requirements for stainless steel.

    X50 HD Galvanized – Baler for harsh wet environments:

    • ASTM A123/A123M galvanized
    • Suitable for all recyclable waste types
    • Handles aluminum cans, PET bottles, and plastic jugs
    • Available with drain for residual liquids
    How does the X50 HD Galvanized baler work?

    Time-saving and easy waste handling

    1. Load your recyclables into vertical baler.
    2. A full-bale light tells you when the baler is full.
    3. Tie off and eject the compacted bale.
    4. Remove the bale with a pallet jack for storage untill collection.
    The X50 HD Galvanized baler is safe and easy to operate
    Our equipment has the highest level of safety – don’t settle with less!
    Bale weight cardboard (lbs)750-1,000
    Bale weight plastic foil (lbs)850-1,200
    Press force (lbs)110,000
    Power supply208/230/480V 3-phase 60Hz
    Motor (HP)7.5
    Noise Level (dB)62-64
    Cycle time avg. (sec)18
    Dimensions WxDxH (inch)78 x 54 x 100
    Weight (lbs)5,370
    Feed opening WxH (inch)43 x 24
    Load height (inch)48
    Chamber height (inch)67
    Stroke (inch)48
    Number of ties4
    Type of tyingTwine / Steel wire
    Full bale lightYes
    Bale ejectAutomatic
    Waste volumeLarge
    Waste Volume
    Large
    FEED OPENING
    43 x 24 Inches
    BALE SIZE
    48 x 30 x 48 Inches
    PRESS FORCE
    110,000 lbs
    BALE WEIGHT
    Cardboard:750-1,000
    Plastic: 850-1,200
    Product Options
    Customize your machine with the perfect product options for your needs
    VERTICAL BALER X50 HD Galvanized
    BRA-IN lets you monitor your balers intelligently
    Gain remote access to your baler with our intelligent fleet monitoring system, BRA-IN. You see balers full, service status, number of collections etc. and optimize your Total Cost of Ownership.
    Handle bottles and cans efficiently with a galvanized flap door
    Use a flap door to avoid waste back-run when you fill cans or PET bottles into your baler. Galvanization makes it suitable for wet waste or waste with residual liquids.
    Lead liquids out of your baler with a draining system
    Compact and drain your waste at once. Equip your baler with an efficient draining system. Dripping is prevented with additional door sealing.
    Block access to baler controls with auto lock
    The auto lock lets you decide who can use your baler. Everyone can load it, but it requires a PIN code or a personal key tag to run press cycles.

    Monitor & Analyze Your Equipment

    Make the most of your equipment with our intelligent monitoring solution. We call it BRA-IN, Bramidan Intelligence. With BRA-IN you can make faster and better decisions, reducing your costs of operation while minimizing your impact on the environment.
    In our business BRA-IN is short for Bramidan Intelligence, and a collective name for our special developed IOT system. This links all connected compaction equipment with IT systems, providing you with a 360 degree view of your equipment minimizing direct and indirect waste handling costs over time.

    Combine our BRA-IN services to fit your needs

    Remarkably Low Noise Level
    Most balers run at around 70-80 dB. At that level they can be harmful. People do not think to wear ear protection while running a baler, and with our baler you never have to, as we have mitigated the noise.
    Many people miss the significance of the low noise levels you get when choosing a Bramidan baler. With the prevalence of earbuds and other devices in our ears most of the time in our leisure, hearing loss is a serious threat. What most people don’t understand about decibels is that their calculation is at a ratio. So the difference between 1 decibel and 10 is a lot in sound comparison.
     
    30dB
    50dB
    75dB
    100dB
    160dB
    X50 Galvanized
    62-64 dB
    Whisper
    Fridge
    Other Balers
    Cars on motorway
    Jet engine
     
     
    FAQ
    VERTICAL BALER X50 HD Galvanized
    Most Common Questions & Answers
    Welcome to our FAQ section, designed to provide quick answers to questions you might have.
    If you need further assistance, don’t hesitate to contact us directly. Your queries matter to us, and we’re here to help!
    Which door type is the most suitable when I need to compact PET bottles?

    Our Flap Door is specially developed for handling PET bottles.

    The Flap Door works just like a chute for the bottles and makes it easy to throw bottles directly into the baler either separately or in full sacks.

    Can I compact cans?

    Yes, you can bale cans and other light metal waste (ie. aluminum) in a baler.

    To bale cans, you will need a machine with a high press force that will compact the material during the first press cycle. With cross cylinders and long cylinder strokes, our X-series balers are designed for compacting cans and other heavy duty materials.

    For a tight and stable bale, we suggest layering a piece of cardboard on both the top and bottom of the finished bale. Another option is to cover the finished bale in shrink wrap.

    Do you know who can pick up my bales?
    Usually, your regular waste collector can handle the bales. Otherwise, we recommend contacting your local recycler who may be able to help you.
    Where should I install my machine?

    The best place to install your baler depends on your internal work procedure and waste flow. We suggest placing the baler near the waste source to allow for more efficient waste handling.

    We are happy to help you find the best location for your machine.

    How does tying the bale work?

    All of our balers have a special pre-load system, which makes it both safe and easy to tie off a carboard or plastic bale. Since the wire and strapping is loaded prior to baling, there is no need to go behind the baler.

    1. While the baler is empty, pull the strapping or wire along the channels inside the chamber and secure with a loop at the front of the machine.
    2. Baler is ready to use – toss in material and make a cardboard or plastic bale.
    3. When baler is full, pull the strapping or wire from the back of the chamber to the front. Tie with the loops you made earlier.
    4. The machine has a knife attached to easily cut strapping.
    5. Eject the finished bale.
    Do you have a compaction solution for recyclables that contain residual liquid?

    Yes, we supply a draining add-on for select models. With this solution, you will be able to bale waste materials that contain liquids, such as aluminum cans and PET bottles.

    To prevent splashing, our draining system also includes a seal for the bottom door.

    Did you find an answer to your questions? If not visit our FAQ universe.
    EXPLORE FAQ

    Fill in the form and we will contact you

    Questions? Contact Us Today

    Sales
    Kristian Buur
    President
    John Bruno
    Sales Director
    Emily May
    Sales Manager
    Jackie Dargavel
    Director of National Accounts

      Fill out your details below and we'll get back to you