No, our balers do not have a built-in scale. However, the bale size and weight do not fluctuate by much and will usually be the same.

Our BRA-IN monitoring solution allows you to view the average weight and number of bales made in your baler each week and/or month. You can also create reports for recycling compliance.

All of our balers are usually very quiet and can be placed in a variety of work environments without causing a disturbance.

Our B-series vertical balers have a very low noise level that never exceeds 57 – 68 decibels. The noise is comparable to that of a vacuum cleaner or air conditioning system.

Our X-series vertical balers have an even lower noise level that does not exceed 59 decibels. The noise is equivalent to conversational speech.

The main difference between the two baler types is the direction of their press stroke.

Vertical balers compress waste materials with a vertical downward force. Waste materials are thrown into a chamber and a press plate moves from the top of the chamber towards the bottom. When a cardboard bale or plastic bale has been made, it is tipped out of the vertical chamber onto a pallet.

Horizontal balers process waste differently than vertical balers. Recyclable waste is thrown into a hopper, and a platen from the side compresses the material with a horizontal force until a bale is complete. The bale is then tied off with wires and pushed out of the machine on two guide rails.

With regard to waste types and volumes handled in vertical balers vs. horizontal balers, they can process many of the same waste materials. Horizontal balers can compact larger bales and a higher volume per day than vertical balers. Furthermore, horizontal balers can be used with in-ground or above-ground conveyor belts, shredders, and air systems. Such applications provide convenience for the consumer and often require less manpower to operate.

But vertical balers take up far less space than horizontal balers, which allows them to be easily used in wider variety of applications than horizontal balers.

When choosing the proper baler, there are several questions to answer. Contact our specialists – they are ready to help you find the type of baler that will best suit the needs of your individual business.

When the baler is full, the orange full-bale indicator light located under the start button will blink. The press plate will also stay in the down position. This prevents the chamber from being overfilled.

We also offer our BRA-IN monitoring solution, which automatically updates you when your machine is full. You will receive a text or email when the bale is finished, telling you it is time to tie off and eject. Our monitoring solution also allows you to notify your recycler or hauler when an agreed upon number of bales are ready for pickup. Learn more about BRA-IN Bramidan Intelligent Monitoring Solution.