Bramidan SC 30
Innovative Hydraulic Design
The SC 30 replaces the traditional crisscross cylinder with a single straight cylinder, reducing the need for hydraulic hoses and ensuring a lifetime liquid-tight seal.
Superior Performance with Energy Efficiency
Our 3 Horsepower Hydro-smart power unit outperforms competitors’ 10 HP units in compaction and cycle time, dramatically reducing electricity usage and operational costs.
30 Yard Self-Contained Compactor – Superior Performance:
- Two-button control station simplifies operation
- Indicator lights ensure safety and alert status
- Ultra-quiet 59dB power unit for low-noise operation
- Simple single-cylinder design reduces complexity
- By-pass functionality allows cylinder motion in both directions
- Elevated cylinder design enhances longevity, prevents fluid contact
- Durable 1-inch rail liners increase wear resistance
- Seamless sidewalls improve structural integrity
- Load Waste – Open the feed opening and place waste into the compactor unit
- Start Compaction – Press the start button to activate the compactor. The waste will be compressed and stored within the unit.
- Monitor Fill Level – Observe the fill level indicator. You will receive a notification when the unit is full.
- Schedule Pickup – Contact your waste company to schedule a pickup once the unit is full.
- Haul Away – The waste company will haul away the entire self-contained compactor unit for emptying.
- Return Unit – After emptying, the waste company will return the empty compactor unit to its original location.
| Press force (lbs) | 51,200 |
| Power supply | 3 x 208 / 230 / 460 VAC |
| Motor (HP) | 5 HP |
| Cycle time avg. (sec) | 41 |
| Feed opening WxH (inch) | 60″ x 40″ |
| Waste volume | Medium |
| Container sizing (cubic yards) | 15-30 |
Monitor and Optimize with BRA-IN
With real-time data and automated notifications, you can make better decisions, cut operational costs, and document your sustainability efforts.
BRA-IN stands for Bramidan Intelligence and connects your equipment directly to an easy-to-use platform – letting you track fill levels, optimize pickups, and schedule maintenance – all in one seamless solution.
Combine our BRA-IN services to fit your needs
Our compactors use 3 L / N / PE; 400 V,50 Hz as standard.
The static and Self-Contained Compactor use 16-32 amperes. The screw compactors usually use 63 amperes.
You can check the required power supply for each compactor in the product specific tech specs.
The difference between a static compactor and a Self-Contained Compactors is whether the press unit stays on-site or if it is attached to the container.
A static compactor consists of two separate units – the press unit and the container unit. The press unit is bolted to a concrete base and stays on on-site.
In a Self-Contained Compactors, the press unit is integrated with the container. This means that both the container and the press unit is picked up for emptying.
Questions? Contact Us Today
